Diamond Stylus
AccuPoint A145 Diamond Recording Stylus
The AccuPoint A145 Diamond Recording Stylus is a professional short-shank diamond cutting stylus designed for disc recording and lathe-cut record production. Each stylus is manufactured and polished in the United States for precision groove cutting, controlled chip formation, and dependable professional use.
The A145 is AccuPoint’s short-shank diamond recording stylus. Its compact shank design is intended for compatible cutter heads and stylus assemblies that require a shorter mounting profile while maintaining precise groove geometry and effective chip evacuation.
The A145 is commonly used for cutting PETG, polycarbonate, and other compatible disc-recording materials. Results depend on the cutting system, material formulation, stylus temperature, cutting angle, groove depth, chip suction, and operator technique.
Each diamond is finished with a sub-micron polish. A highly polished cutting surface helps reduce friction, supports cleaner groove formation, improves chip flow, and may contribute to longer stylus life when the stylus is installed and operated correctly.
Yes. The A145 includes a professionally installed heat wire for integration with a compatible stylus-heating system. The installer is responsible for confirming the correct connection method and operating settings for their cutting system.
No. Cutter heads and stylus holders may use different shank lengths, mounting geometries, heating arrangements, and operating angles. Compatibility with the purchaser’s cutter head, stylus holder, amplifier, heating system, and recording lathe is the purchaser’s responsibility.
Stylus life cannot be guaranteed by a fixed number of hours. Wear depends on the recording material, groove depth, cutting pressure, stylus heat, suction, head alignment, contamination, handling, and operator technique. Incorrect installation or operation can damage a stylus immediately.
Each order includes one AccuPoint A145 diamond recording stylus with its pre-installed heat wire. Unless specifically stated elsewhere in the product listing, cutter heads, stylus holders, heating power supplies, suction equipment, and installation tools are not included.
Our re-sharpening service operates as an exchange program. We accept only genuine AccuPoint A145 diamond recording styli for this program.
When you submit an eligible used AccuPoint A145, you may purchase a previously used AccuPoint A145 that has been professionally reconditioned and freshly sharpened.
This is not a repair-and-return service. The stylus you receive will not necessarily be the same physical stylus that you submitted. Submitted eligible styli become part of the A145 exchange inventory and are not individually reserved for return to their original owners.
Styli from other manufacturers and other AccuPoint models are not accepted. Modified, incomplete, severely damaged, or non-genuine styli may be rejected after inspection.
If a submitted stylus is determined to be unsuitable for the exchange program, the customer may pay the applicable shipping charge to have it returned or authorize Lathe Cut Vinyl Records to dispose of it. We do not pay return shipping for rejected styli.
Diamond stylus orders shipping within the United States are charged a flat $10 shipping fee and are shipped using USPS Priority Mail. Tracking is provided when the order ships. USPS delivery estimates are not guaranteed by Lathe Cut Vinyl Records.
Diamond stylus orders shipping to Canada are charged a flat $25 USD shipping fee and are shipped using USPS International. International transit times vary based on postal service and customs processing. Tracking availability and tracking detail may vary after the package enters Canada.
Diamond stylus orders shipping to the United Kingdom and Europe are charged a flat $50 USD shipping fee and are shipped using USPS International. International transit times vary by destination, postal service, and customs processing. Tracking availability and tracking detail may vary after the package enters the destination country.
Diamond stylus orders shipping to other supported international destinations are charged a flat $50 USD shipping fee and are shipped using USPS International.
We do not ship international diamond stylus orders using DHL, FedEx, or UPS. International transit times vary by destination, postal service, and customs processing. Tracking availability and tracking detail may vary after the package enters the destination country.
We are currently launching international shipping on a country-by-country basis. Countries will continue to be added to checkout as we confirm reliable USPS service and shipping requirements for each destination.
If your country is not currently available at checkout, please contact us at info@lathecutvinylrecords.com . We will determine the available shipping service and cost for your country and can send a custom invoice when shipping is available.
Every international shipment is submitted with a complete and accurate USPS customs declaration.
Product description: Diamond Recording Stylus
Package contents: Merchandise
Country of origin: United States
HS tariff code: 8522.90
Declared customs value: The actual purchase price paid
We do not undervalue merchandise, alter invoice values, mark commercial merchandise as a gift, misclassify the product, or submit false customs information.
The customer is responsible for all import duties, VAT, GST, customs fees, postal handling charges, brokerage charges, taxes, and other fees imposed by the destination country. These charges are not included in the product price or shipping fee.
Because diamond recording styli are precision professional tools that are individually manufactured, handled, and prepared for shipment, all diamond stylus sales are final.
No refund, exchange, replacement, or store credit will be issued because of unpaid customs charges, import restrictions, refused delivery, failure to claim the package, customs abandonment, an incorrect customer address, or failure by the customer to complete required import documentation.
If a package is returned to us because of unpaid duties, refused delivery, an incorrect or incomplete address, failure to claim the shipment, or another customer-related delivery issue, it may be shipped again after the customer pays all applicable shipping, carrier, customs, and handling charges.
The separate A145 re-sharpening exchange program does not create a general return or exchange right for newly purchased styli.
This is a specialized professional cutting tool. Before ordering, confirm that the A145 short shank, heat-wire arrangement, mounting method, cutting geometry, amplifier, heating system, stylus holder, and operating requirements are compatible with your cutter head and recording system. Technical questions may be sent to info@lathecutvinylrecords.com .
Manufactured for precision groove cutting, controlled chip flow, and dependable performance in professional disc-recording applications.
Record Blanks
PETG VR Black Record Blanks FAQ
PETG VR is our specialized black PETG material developed specifically for diamond-stylus record cutting. Every blank is CNC manufactured by LatheCutVinylRecords.com and designed for professional lathe-cut record production.
PETG VR is a specialized black PETG material selected for diamond-stylus record cutting applications. It is intended for professional lathe-cut record production, independent record manufacturing, and small-run production.
Every PETG VR blank is CNC manufactured by LatheCutVinylRecords.com. We machine and inspect our blanks in-house as part of our production process.
In our own shop, we cut PETG VR using a Vinyl Recorder T560, System Phonics Nebula stereo cutterhead, and AccuPoint diamond recording stylus.
This is the production setup we use ourselves for testing and record manufacturing.
PETG VR was developed and tested alongside our AccuPoint diamond recording styli. Our own cutting setup uses AccuPoint diamond styli with stylus heat, suction, alignment, and cutting geometry optimized for our production process.
PETG VR is designed for diamond-stylus record cutting and may be used with a variety of professional cutting systems.
Because every lathe, cutterhead, stylus, heating system, suction setup, and cutting process is different, customers are responsible for determining compatibility with their own equipment and operating setup.
We recommend testing the material with your system before beginning a large production run.
PETG VR blanks are available in multiple formats including 7", 10", and 12" record formats. Availability may vary based on inventory and production runs.
Production times vary depending on current shop volume, quantity, material availability, and the type of order.
As a general estimate, most standard blank orders of up to 250 blanks are typically prepared within approximately 1–3 business days.
Larger production orders of more than 250 blanks may require approximately 7–14 business days before shipping.
These timeframes are general production estimates only and are not guaranteed completion or delivery dates.
U.S. blank orders are charged $10 shipping per 10 blanks and generally ship via USPS Ground Advantage.
USPS transit time is separate from production time and begins after the completed order has been packed and accepted by USPS.
Blanks are shipped flat and protected using packaging materials selected according to the quantity and shipment size.
Large orders may ship in multiple boxes. Tracking information is provided when the order ships.
Yes. Custom CNC machining, specialty record formats, engraving, and other custom manufacturing services may be available upon request.
For custom manufacturing, please confirm your required specifications with us before production. Customers are responsible for confirming that requested custom specifications are suitable for their equipment and intended application.
Record blanks are specialty manufactured products and are final sale.
Please confirm that the product is appropriate for your application before ordering. If you believe you received an incorrect or defective product, contact us within 7 days of delivery so the issue can be reviewed under our Returns & Refund Policy.
International shipping is available for eligible blank orders in select regions. Shipping rates depend on quantity, package size, weight, destination, and available carrier service.
International customers are responsible for applicable import duties, VAT, GST, customs fees, and other destination-country charges.
Contact us within 7 days of delivery and retain the original packaging.
Please include photos of the shipping package, internal packaging, and affected product so the claim can be reviewed under our Shipping Policy and Returns & Refund Policy.
No. Record blanks are specialty products and follow their own shipping, packaging, handling, and fulfillment rules.
The standard custom-record Media Mail shipping structure does not apply to record blanks. U.S. blank orders are generally shipped via USPS Ground Advantage at $14 per 10 blanks.
PETG VR is developed specifically for professional diamond-stylus lathe-cut record production. In our shop, we use PETG VR with a Vinyl Recorder T560, System Phonics Nebula stereo cutterhead, and AccuPoint diamond recording stylus. Actual cutting performance depends on the individual cutting system, setup, material handling, and operating parameters.
Anti-Static Ooze
Anti-Static Ooze FAQ
Anti-Static Ooze is our water-based anti-static cutting fluid developed specifically for lathe-cut record production. It helps control static during cutting so swarf is less likely to cling to the record surface and can be removed more effectively by your suction system.
Anti-Static Ooze is a water-based anti-static cutting fluid developed for lathe-cut record production. It helps control static during the cutting process so freshly cut swarf is less likely to cling to the record surface.
Static can cause freshly cut swarf to stick to the record, cutterhead area, stylus, and surrounding equipment. Anti-Static Ooze helps reduce that static buildup so your suction system can remove swarf more effectively.
Apply a small amount to the record blank before cutting and spread it into a thin, even film across the cutting surface.
You do not need to flood the record. A little goes a long way.
Yes. Anti-Static Ooze is not a replacement for swarf suction. It is designed to work with your vacuum system by helping prevent static-charged swarf from sticking to the record.
Yes. Anti-Static Ooze was developed around our own PETG lathe-cutting workflow and is intended for use during diamond-stylus cutting of PETG record blanks.
Each product addresses a different part of the record-cutting process:
PETG VR — the specialized record blank material.
A145 Recording Stylus — the diamond stylus that cuts the groove.
Anti-Static Ooze — helps manage static and swarf during the cut.
This is the combination we use as our complete PETG diamond-cutting workflow.
Potentially. Record blank materials can vary considerably between manufacturers. We recommend testing a small area and confirming compatibility with your particular blank, stylus, cutterhead, and cutting process before beginning production.
No. Anti-Static Ooze is water-based. It was developed specifically so cutters do not need to rely on lighter-fluid-type solvents as part of the normal record-cutting workflow.
No. Lighter fluid is sometimes used by cutters to remove stubborn adhesive or residue from plastic, but there is no reason for it to be part of the normal cutting process.
For normal handling and cutting, there should be no need to routinely wipe PETG with aggressive solvents. Anti-Static Ooze can be used as part of the normal cutting workflow.
Routine diamond cleaning generally does not require acetone. In our shop, we keep only a very small amount of isopropyl alcohol and cotton swabs available for occasional stylus cleaning.
A stronger solvent should only be considered when there is actually stubborn plastic contamination or residue that requires removal.
No anti-static treatment can guarantee zero static under every condition. Humidity, blank material, grounding, cutter configuration, stylus heat, suction, and the surrounding environment can all affect static behavior.
Only use enough to create a thin, even coating across the cutting surface. More is not necessarily better.
Anti-Static Ooze is intended to be applied to the record surface. It is not intended to be used as a stylus-cleaning solvent.
Anti-Static Ooze is water-based and was developed as an alternative to having highly volatile lighter-fluid-type solvents involved in the routine cutting process.
No. Anti-Static Ooze is designed for a cleaner everyday cutting workflow without the strong petroleum-solvent odor associated with lighter fluid.
As with any liquid used around electrical and mechanical equipment, use only a small controlled amount. Keep liquid away from electronics, motors, connectors, and other areas that should remain dry.
PETG VR + A145 + Anti-Static Ooze
Our complete PETG diamond-cutting workflow:
the blank, the diamond, and static control working together.
Actual results depend on the individual cutting system,
setup, environment, and operating parameters.
