A dubplate is a custom lathe cut vinyl record made one at a time in real time. There’s no pressing plant or molds involved—your audio is carved directly into a plastic disc using a diamond stylus. They’re perfect for DJs, selectors, limited releases, collectors, short runs, or one-off gifts.

How do bulk discounts work?

Bulk discounts are automatically applied at checkout—no code needed. The discount applies to qualifying items in a single order before shipping and taxes.

What are the bulk discount tiers?

10+ items get 10% off, 20+ get 15% off, 30+ get 20% off, and 50+ get 25% off.

Do I need a coupon code for bulk discounts?

No. Discounts are calculated and applied automatically at checkout.

Does the discount apply to shipping or taxes?

No. The discount applies only to qualifying items in the order subtotal before shipping and taxes.

What does the runtime shown in the table mean?

The runtime in the table is the maximum total minutes of audio for that format and speed.

What audio format should I send?

Send WAV files, 24-bit preferred (16-bit is OK), 44.1 kHz or higher. Do not send MP3s. Upload two files named Artist_SideA.wav and Artist_SideB.wav.

Should I limit my audio before sending?

Avoid brickwall limiting. Pre-limited mixes are acceptable, but dynamic mixes cut louder and cleaner.

How should I handle bass and low-end for vinyl?

Center all bass below about 150 Hz to 100% mono with a correlation of +1.0. Low end can be monoed in pre-mastering if needed.

What should I know about stereo imaging and phase?

Keep stereo correlation positive (above 0) between 150 Hz and 4 kHz to avoid cancellations. Above 10 kHz, very wide stereo can cause splash—use with care. Always check mixes in mono.

How should I control sibilance for vinyl?

Control harsh S sounds by de-essing in the mix. We will address sibilance during pre-mastering where possible.

No. Do not clip. Square-wave distortion is amplified on vinyl and is hard on the cutting head.

Should I boost highs for vinyl?

Avoid heavy boosts above 10 kHz. Content above 15 kHz can distort or splash during cutting.

How long can each side of a lathe cut record be?

Longer sides require lower volume, resulting in more surface noise. Inner grooves lose high-end and distort more on bright or loud material. Typical max side lengths: 7″ up to 4 min; 10″ 6–10 min (45/33⅓); 12″ 8–15 min (45/33⅓). Put detailed tracks first and quieter tracks last.

What reference level do you use for mastering?

All audio is aligned to DIN 45 541 calibration: 0 dB reference equals a 1 kHz tone at 5 cm/s RMS lateral velocity. For premaster files, this is roughly −20 dBFS RMS.

How do I upload my audio and artwork files?

We use an uploader built directly into the cart. While placing your order, you can click or drop your files using the Hot Pink button.

What file types and sizes are accepted?

Accepted types: WAV or AIFF for audio; PNG, PDF, JPEG/JPG for artwork; ZIP for bundles. Max total size is 200 MB. Use one file per side—Side A and Side B. If files are too large, send via WeTransfer to info@lathecutvinylrecords.com.

What is the production turnaround time?

Standard turnaround is about 2 weeks once we receive your audio and artwork.

How long does shipping take?

U.S. orders usually arrive within 3–5 business days after shipping. International orders typically arrive within 7–21 business days depending on location and customs.

Can I get a tracking number?

Yes. You will receive a tracking number once your order ships.

Do you offer rush options?

Rush options may be available. Please contact us before ordering to confirm.

What is your return policy?

Due to the custom nature of lathe cut vinyl records, all sales are final. Each record is handmade to your order and cannot be resold or reused, so we do not accept returns or exchanges.

What if there’s a problem with my order?

If your order arrives damaged or has a playback issue, contact us at info@lathecutvinylrecords.com and we’ll make it right.

12″ Gold Lathe Cut Vinyl Record

Name: 12″ Gold Lathe Cut Vinyl Record – Playable Trophy Edition (33⅓ RPM, Custom Finishes Available)
Brand: Lathe Cut Vinyl Records
Price: 75.0 USD
Availability: InStock

12″ Mirror Gold Vinyl Record – Playable Trophy Edition (33⅓ RPM, Custom Finishes Available) Lathe Cut Vinyl Records

1/2

12″ Gold Lathe Cut Vinyl Record – Playable Trophy Edition (33⅓ RPM, Custom Finishes Available)

$75.00 USD

Color

Sides

12″ Gold Lathe Cut Vinyl Record – Playable Trophy Edition (33⅓ RPM, Custom Finishes Available)

💿 Overview

A fully playable 12″ record built with our Matte Gold vinyl core, hand-cut in real time at 33⅓ RPM.
It offers the same warm analog sound as our standard PETG records — but with a reflective, trophy-grade finish made to impress.

Perfect for:

Singles, EPs, or album features
Limited-edition or collector releases
Artist awards and presentation records
One-off showpiece cuts

💡 Note: Solid color versions made this way are more affordable than our solid PETG color records, while still offering full playability and professional sound.
Our 12″ clear PETG records are 0.08" thick, the same thickness used here.

🎨 Finish Options

This listing is for Mirror Gold, our signature playable trophy record.
Other finishes are available by custom order and built individually by request.

Finish Type	Description
Mirror Gold	Trophy-grade, ultra-reflective gold surface — classic award finish.
Mirror Custom	Chrome mirror finish in your choice of color (silver, red, blue, etc.). Confirm your tone after checkout.
Metallic Custom	Satin or brushed metallic tone — gold, silver, bronze, or copper look.
Solid Custom	Opaque colored vinyl (white, black, red, or any solid tone). More affordable than solid PETG blanks.
Holographic Custom	Iridescent foil finish that shifts color under light for maximum visual impact.
Dual-Color Core	Two-tone build (e.g., gold/silver, red/black) — different colors per side, both playable.

⚠️ Custom colors are not kept in stock. Please email info@lathecutvinylrecords.com before ordering if you’d like a non-gold or dual-color option.

⚙️ Specifications

Size: 12 inch
Speed: 33⅓ RPM
Format: Single- or Double-Sided Audio
Core: Vinyl-Film Laminate (Mirror / Metallic / Matte)
Thickness: 0.08", same as our standard 12″ clear PETG records
Cut Type: Playable lathe-cut record
Sold: Individually (1 Record)
Turnaround: 2–3 weeks

🔊 Sound + Craft

Each record is cut on a precision lathe using diamond tooling for clean, dynamic playback.
The mirror laminate is sealed under clear vinyl for full playability and a deep, polished shine.
The result is a true analog record with a museum-quality finish — part art, part artifact.

💌 Custom Orders

Need special colors, center-label engraving, or mixed finishes?
We also cut custom sizes (7″, 10″, and other formats) and shaped records (heart, star, tree, or your own design).

Email info@lathecutvinylrecords.com before ordering to confirm your color, size, or shape.

🛒 Notes

Fully playable 12″ record (A/B sides optional).
33⅓ RPM format only for this series.
Mirror Gold in stock; other finishes by request only.
Ships in a protective sleeve and rigid mailer.

Country/Region

12″ Gold Lathe Cut Vinyl Record – Playable Trophy Edition (33⅓ RPM, Custom Finishes Available)

💿 Overview

🎨 Finish Options

⚙️ Specifications

🔊 Sound + Craft

💌 Custom Orders

🛒 Notes

12″ Gold Lathe Cut Vinyl Record – Playable Trophy Edition (33⅓ RPM, Custom Finishes Available)